Xovis PC2S is a high-precision stereo camera for people counting of the second generation matching the DSGVO. It offers the possibility of evaluating 99 counting lines and 99 counting zones for each sensor. Several meters can simply be interconnected to cover larger areas. The counting works independently, no PC is required for operation.

Xovis PC2S is a high-precision stereo camera for people counting of the second generation matching the DSGVO. It offers the possibility of evaluating 99 counting lines and 99 counting zones for each sensor. Several meters can simply be interconnected to cover larger areas. The counting works independently, no PC is required for operation.

ERS Eco is a LoRaWAN® temperature and humidity sensor for the indoor environment. This sensor is your environmentally friendly option, with an organic solar cell as the only power source and an enclosure made from biodegradable material. Removing batteries from a wireless IoT device significantly reduces the environmental impact and maintenance costs.

ERS Eco CO2 is a LoRaWAN® temperature, humidity, and CO2 sensor for the indoor environment. This sensor is your environmentally friendly option, with an organic solar cell as the only power source and an enclosure made from biodegradable material. Removing batteries from a wireless IoT device significantly reduces the environmental impact and maintenance costs.

ELT Ultrasonic is enclosed in an IP67 box which makes it ideal for mounting outside or in extreme conditions. Use the distance sensor to measure water level under a bridge, trash level in a container, and much more. With this device, you can also measure the ambient temperature, humidity, atmospheric pressure, and acceleration.

ERS VOC is a smart and professional LoRaWAN® sensor for indoor air quality applications. It will measure the levels of the volatile organic compound in the ambient air which says a lot about the general air quality.

ERS is a sensor for simple and easy environment measuring. It measures temperature and humidity.

ERS CO2 Lite gives you the opportunity to create the best possible workplace, classroom, library, or another public area. The sensor measures CO2, temperature and humidity.

ELT Lite is the ideal device to use together with an external sensor. Use it together with an electricity meter, flow meter, analog sensor, moisture sensor, or something else that fits your needs. ELT Lite has one generic input. You can configure ELT Lite for external temperature probe, pulse counting, analog-input 0-10V, digital-input, water leak, switch, and many more options.

ELT-2 measures analog or digital signals. It is a 2-channel GPIO wireless transceiver and can also provide power to external sensors. Inside you will find four internal sensors for measuring temperature, humidity, acceleration and pressure.

EMS Desk is equipped with a body heat sensor and can detect when somebody is standing or sitting by a desk, even if the person is still. You can combine the environment measuring together with occupancy detection since the EMS Desk is equipped with internal sensors for measuring the temperature and humidity as well.

Inside EMS Lite, you will find internal sensors for measuring the indoor temperature and humidity. It also has a water leak detector. Typical use cases for this sensor is easy indoor environment measuring and water leak detection for facility management.

Inside EMS Door you will find internal sensors for detecting when something has moved. Typical for door activation but the application scope is bigger than that. The minimal magnet is designed to be mounted on the part that may move and the EMS Door close to it on something fixed.

Inside EMS you will find internal sensors for measuring indoor temperature, humidity, acceleration, opening activity and a water leak detector. This makes the EMS one of our most all-round sensors.

ERS Desk is designed to mount under the desk and senses when somebody is using the desk (standing/sitting). It can be used for dynamic workplace management, facility management and workplace statistics. The sensor also measures temperature, humidity, motion and light.

ERS Eye is a sensor for measuring room occupancy. The sensor also measures indoor temperature, humidity, light, and motion. The occupancy is detected with an IR sensor and will tell if someone is in the room, even if sitting still in a meeting.

ERS Sound measures the average and peak sound pressure level with dBA filtering. It wakes and samples both signals every 10s, and does the final calculation before sending the data at the desired send interval. The sensor also measures temperature, humidity, motion and light.

ERS CO2 gives you the opportunity to create the best possible workplace, classroom, library, or another public area. The sensor measures CO2, temperature, humidity, light, and motion.

ERS is a sensor for measuring the indoor environment. It measures temperature, humidity, light, and motion.

The Parking Lot Sensor (PLS) detects and reports parking space occupancy, thus enabling active parking lot management features, such as search, navigation and reservation.

The Parking Lot Sensor (PLS) detects and reports parking space occupancy, thus enabling active parking lot management features, such as search, navigation and reservation.

Multisense functionalities as Service Button, Workplace Detection, Humidity & Temperature, Magnet and Vibration.

LT-20 is a solar powered tracker designed for asset tracking and range animals use. The high performance solar panel can provide sufficient power. Its light-weight and tag style design allows you to easily pin on cattle’s ear (LT-20). Optional LT-20P bottom case and collar can be chosen for installing on cattle’s back.

The LS-113G air quality sensor is an indoor sensor for determining the temperature, humidity and fine dust content of the room air. With calibrated dust (PM2.5) sensor module and compensated Temperature/ Humidity sensor integration, the data is ready for use.

Decentlab’s outdoor-ready air quality monitor continuously measures carbon dioxide (CO2) concentration, temperature, humidity and barometric pressure.

Measures carbon dioxide (CO2) concentration, volatile organic compounds (VOC), temperature, humidity, barometric pressure, ambient light and motion / presence.

Air temperature and humidity sensor with radiation shield. Can be used for example for smart agriculture, urban heat islands, greenhouses, frost alarming or building automatione

Enables remote monitoring of water level, fill level of tanks and silos, fill level of waste containers, presence of objects or snow level. It measures the distance between the sensor head and the target (rangefinder). The measurement principle is based on ultrasonic waves which are transmitted by the sensor and reflected back from nearby objects.

Enables high-precision remote monitoring of water level in open water, fill level of tanks, groundwater level and various other applications. It measures the pressure at the sensor head relative to the pressure at the cable end. When the sensor head is placed under water (or any other liquid), the relative pressure indicates the depth of the sensor head.

Enables remote monitoring of pressure in pipelines or tanks. It measures the pressure at the G 1/4” pipe connection relative to the pressure at the cable entry

All-in-one weather station with sensors for solar radiation, precipitation, air temperature, relative humidity, indoor temperature, vapor pressure, air pressure, barometric pressure, wind speed and direction, maximum wind speed, tilt sensor, number of lightning strikes and average lightning distance.

Measures the soil moisture and temperature in 100mm, 200mm, 300mm, 400mm, 500mm and 600mm depth with a very robust probe design. This enables precise statements to be made about the soil and enables intelligent agriculture and monitoring of greenhouses, parks or golf courses.

Enables remote monitoring of water level in open water, fill level of tanks, groundwater level and various other applications. It measures the pressure at the sensor head relative to the pressure at the cable end. When the sensor head is placed under water (or any other liquid), the relative pressure is proportional to the depth of the sensor head.

The Device Simulator allows you to send data to your HTTP device on akenza without the need for a physical device.

The room climate sensor continuously records selected parameters and measures, for example, the room temperature, the humidity and also the air quality by means of CO2 measurement.

The Dragino LHT65N Temperature & Humidity sensor is a Long Range LoRaWAN Sensor. It includes a built-in Temperature & Humidity sensor and has an external sensor connector to connect to an external Temperature Sensor.

Soil Moisture & EC Sensor for smart agriculture use cases. It detects Soil Moisture, Soil Temperature and Soil Conductivity.

WisNode Button (RAK612 model) is a remote wireless trigger and supports user-defined functions for each key.

The adeunis DRY CONTACTS is a ready-to-use radio transmitter enabling the user on one hand to transfer statuses and alarms on a LoRa network and on the other to control relays via the same network. This product meets the needs of users who require to remotely monitor (or control) simple on-off digital data: detection of door opening, presence, machine starting, warning, etc

Meter flow rate monitoring from water, gas and electricity meters. Up to 2 connectable meters. Detection of tampers and leaks.

Immediate viewing of network coverage data (radio power and received signal strength)

For monitoring and control tasks in power, water or other infrastructure networks. Configurable to your needs

Compact and versatile useable sensorpackage with temperature, humidity, GPS, acceleration sensors and more.

The LPN CM-2 has a built in temperature and humidity sensor and is able to connect an external sensor like a PT100 or LEM Converter

The LPN CM-1 has a built in temperature and humidity sensor.

The device allows the control on two solid state relays (24VDC/500mA).

The LPN CM-3 has a built in temperature and humidity Sensor and an external PT100 sensor for measuring external temperature

The LPN CM-4 has a built in temperature and humidity sensor.

The Tabs PIR & Occupancy sensor detects occupancy or motion.

Browan's Tabs Water Leak Sensor is an invaluable device to avoid water damage from floods and leaks. The sensor sends an uplink when it detects water, giving you advanced warning of your kitchen appliance, boiler or tank springing a leak.

The Door & Window sensor detects the proximity or not of a magnet. The intended use is to place the sensor and magnet on separate elements of a door or window to determine if the door or window is open or closed.

The Tabs sound level sensor for easy measurement of sound level in decibels (dBA) in a variety of building environments.

The Tabs Temperature & Humidity Sensor is designed for in-home and in-building usage for consumer or facility management applications.

The PlacePod parking sensor is finely tuned to reliably detect parking events and at the same time use as little energy as possible. With its powerful magnetic sensor, it works stably even with temperature fluctuations.

Advanced indoor air quality sensor device featuring various sensors environmental conditions such as temperature, relative humidity and Co2.

The miro Click can be used as a service-ondemand button, remote control, emergency or notification button and much more. It contains four integrated buttons and is configured over the air either as a single-, two- or four-button button device.

AstraLED Indoor LoRaWAN® device for measuring the indoor environment and signaling those through different colors

AstraLED Smartline lamp for measuring the indoor environment and signaling those through different colors

AstraLED Mantis floor lamp sends information on brightness, air quality and noise level. Can get combined with other floor lamps for area-wide lighting control

The Buttonboard is a flexible event triggering device with 6 touch sensor buttons. The case of the Buttonboard is easily cleanable (splash-proof) and transparent. The six capacitive touch sensor buttons can individual be enabled or disabled and comes with a RGB-LED ring each.

The Oxobutton Q has four tactile buttons in the corners which leads to a total of nine different recognizable tilt or click operations. Besides the clicks in the corners, you can also tilt it up/down & left/right or press all four buttons together. The images on the e-ink display are customizable by BLE with a seperate mobile app.

R711 is mainly used to detect the temperature and humidity of indoor air.

R311A is equipped with a reed sensor, which can be used to detect the status of the door and window.

The R312A is an emergency button switch device that detects the closing or opening signal of the emergency button switch.

Active IR occupancy and magnetic sensor for smart offices and buildings. Strips Presence can also be used for asset monitoring and optional as button or switch.

Strips +Guard is a magnet sensor for monitoring windows, doors, and valuables. Strips +Guard can also be used for temperature measurements.

enLink Status-DP measures differential pressure in the range of 25Pa to 5000Pa with industry leading accuracy of 0.1% of selected range. Unique Multi-Range digital sensor allows multiple pressure ranges to be selected automatically or remotely.

enLink Status-T accurately measures temperature with up to three precision temperature probes with a range of -55°C to +125°C. Temperature measurement via flexible, long lead probes allows precise temperature monitoring in a wide variety of applications including HVAC ducts and pipes, food storage, soil, remote asset and legionella monitoring.

In case of manipulation and removal of the safety splint on the fire extinguisher, an alert can be sent. Magnet reed sensor monitors position of safety splint.

Ultra-rugged GPS tracking device for long-term asset tracking. High-precision GPS/GLONASS tracking device tracks assets when they’re on the move and enters sleep mode when stationary to save power

Plug-and-play OBDII GPS tracking device with backup battery for real-time vehicle and fleet management

Robust and affordable vehicle tracking device with inputs/outputs, remote immobilization for fleet management, driver ID, driver safety and behavior monitoring, theft recovery, and more

Tiny, lightweight and ultra-rugged battery-powered geolocation tag for affordable indoor and outdoor asset monitoring on LoRaWAN® networks

Robust and rugged datalogger with inputs/outputs and I²C sensor interface for asset and sensor monitoring on LoRaWAN® networks

Tiny, lightweight and ultra-rugged battery-powered geolocation tag for affordable indoor and outdoor asset monitoring on LoRaWAN® networks

Rugged and robust vehicle, trailer, or heavy equipment tracking device with inputs/outputs.

Ultra-rugged GPS tracking device for long-term asset tracking. High-precision GPS/GLONASS tracking device tracks assets when they’re on the move and enters sleep mode when stationary to save power

SenseCAP S2105 Soil Temperature, Moisture, and EC Sensor satisfy industrial long-distance data acquisition with a wide range of 0 ~ 100% (m³/m³), -40 ~ 80℃, and 0 to 23 dS/m respectively. It enables low maintenance cost for its robustness, long battery usage, and built-in Bluetooth for OTA configuration and remote device management.

SenseCAP LoRaWAN® S2103 CO2, Temperature, and Humidity Sensor satisfies industrial wireless long-distance data acquisition with a wide measuring range of 400 to 10000 ppm, -40°C to 85°C and 0 to 100% RH respectively. It enables low maintenance cost for its robustness, long battery usage, and built-in Bluetooth for OTA configuration and remote device management.

SenseCAP S2104 - LoRaWAN Soil Temperature and Moisture sensors satisfies industrial long-distance data acquisition with a wide range of 0 ~ 100% (m³/m³) and -40 ~ 80C respectively.

SenseCAP A1101 - LoRaWAN Vision AI Sensor is a TinyML Edge AI enabled smart image sensor. It supports a variety of AI models such as image recognition, people counting, target detection, meter recoignition etc. It also supports training models with TensorFlow Lite.

Wireless air humidty and temperature, a custom battery and an IP66 enclosure, optimized for outdoor use cases that need reliable data collection over years.

SenseCAP S2102 sensor detects light intensity, has a custom battery and an IP66 enclosure, optimized for outdoor use cases that need reliable data collection over years.

SenseCAP Wireless Soil Moisture and Temperature Sensor measures soil volumetric water content (VWC) and temperature. It's designed with a 2-in-1 sensor that integrates soil temperature and soil moisture, a custom battery and an IP66 enclosure, optimized for outdoor use cases that need reliable data collection over years.

Single or Double Tinovi Soil Moisture/Temperature/(Expermetal EC) sensor.

ALEVEL 1x5 is an IoT smart tank sensor that clicks in to standard Rochester R3D® mechanical dials commonly used on float arm level gauges. Functions include tank fill detection, dial removal, spill detection, and high & low level alerts.

ALEVEL 1x5 is an IoT smart tank sensor that clicks in to standard Rochester R3D® mechanical dials commonly used on float arm level gauges. Functions include tank fill detection, dial removal, spill detection, and high & low level alerts.

The compact radio module for the T550 meters, transmits measurements of flow, backflow and energy in a heat or cold circuit with water using the ultrasonic principle.

Simple readout of water and gas meters with GWFcoder® registers without necessity to access buildings

Monitoring of energy efficiency and energy cost allocation, operation of sub-range meters in large buildings, large plants, farms and urban areas are the best application for LoRa®-based CARLO GAVAZZI systems.

WS50x is a smart LoRaWAN® wall switch for thelocal and remote control of lights and electrical appliances. It adopts two standard sizes for most of international wall switcht ypes, which can replace the traditional wall switches directly.

WS50X2 is a smart LoRaWAN® wall switch for thelocal and remote control of lights and electrical appliances. It adopts two standard sizes for most of international wall switcht ypes, which can replace the traditional wall switches directly.

WS52x is a LoRaWAN® smart portable socket for the monitoring and control of electrical appliances. Adopting most of international socket types, WS52X can be used for turning on or off the electrical devices locally or remotely and measuring power consumption data plugged on it and even sending overcurrent alarms.

WS136 LoRaWAN® Smart Scene Panel gives a multibutton control panel that can simply activate different pre-defined scenes with one-press. Without any additional cable, WS136 can be easily installed anywhere and used tocontrol devices via LoRaWAN®. Besides, it's equipped a user-defined E-ink screen to suit different scenes.

WS156 LoRaWAN® Smart Scene Panel gives a multibutton control panel that can simply activate different pre-defined scenes with one-press. Without any additional cable, WS156 can be easily installed anywhere and used tocontrol devices via LoRaWAN®. Besides, it's equipped a user-defined E-ink screen to suit different scenes.

WS302 is an advanced LoRaWAN® Sensor for monitoring noise/sound level in decibels (dB) with ease. Choose A-weighting or C-weighting based on scenarios. Usually, A-weighting is appropriate for quiet environments while C-weighting is for noisy environments.

AM103 is a compact indoor ambience monitoring sensor for measurement of temperature, humidity and CO2. These data will be shown on the E-ink screen in real-time, which allow to quantify the indoor environment and comfort. AM103 is widely used for office, store, classroom, hospital, etc

AM307 is a compact indoor ambience monitoring sensor for measurement of multiple environmental conditions. Values are shown on the E-ink screen in real-time that allows to quantify the indoor environment and comfort.

AM308 is a compact indoor ambience monitoring sensor for measurement of multiple environmental conditions. Values are shown on the E-ink screen in real-time that allows to quantify the indoor environment and comfort.

EM300-MCS is a compact magnet switch sensor for detecting open/close status of objects (such as doors or windows) and transmitting alarm using LoRaWAN® technology. With this low power consumption technology, EM300-MCS can work up to 5 years with 4000 mAh battery

The EM300-SLD will help prevent potential water damage to properties or assets through instant water leak detection.

EM310-TILT is a LoRaWAN® tilt sensor mainly for angle measurement and asset movement detection. With a compact size and 3-axis accelerometer, EM310-TILT can be installed to the objects easily to measure its X, Y, Z tilt angles. It can also detect the movement based on angle changes and send threshold alarms

Milesight EM310-UDL is a LoRa ultrasonic distance sensor mainlyfor the detection of waste bin and other container's fill level. With a compact size and wide measure range, EM310-UDL can be installed to any types of waste bins or containers to monitor solid or liquid level. Besides, EM310-UDL equips with 3-axis accelerometer to detect the status of container cover.

Milesight EM320-TH is a LoRa temperature and humidity sensor mainly for indoor or outdoor use.

EM320-TILT is a LoRaWAN® tilt sensor mainly for angle measurement and asset movement detection. With a compact size and 3-axis accelerometer, EM310-TILT can be installed to the objects easily to measure its X, Y, Z tilt angles. It can also detect the movement based on angle changes and send threshold alarms

EM500-LGT is designed for ambient light intensity detection in harsh environments. It is useful in many applications, such as brightness control, security, horticulture, floriculture and so on.

EM500-PP sensor is designed for measuring pressures from liquids and gases in order to realize the pressure monitoring of tank level or leakage in pipes.

EM500-PT100 resistance temperature sensor is designed for measuring wide range of temperature in harsh environments and transmitting data using LoRaWAN® technology. With this low power consumption technology, EM500-PT100 can work up to 10years with 19000 mAh battery.

EM500-SMTC provides an external probe for receiving accurate and instantaneous information on soil moisture content, temperature, and electrical conductivity, it is an important tool for anyone involved with soil.

EM500-UDL provides highly accurate distance measurement for a variety of applications in harsh environments like flood monitoring, wastewater management, fill level monitoring in grains or fertilizer. The measurement is based on ultrasonic waves transmitted and reflected back from nearby objects.

The EM300-ZLD will help prevent potential water damage to properties or assets through instant water leak detection.

AI powered sensor for anonymous people counting and measuring workspace utilization.

Smart button with multiple press actions for generating alerts. Collaborative interaction with Milesight IoT sensors to trigger actions intelligently.

Compact indoor device for motion and brightness detection. Collaborative interaction with Milesight IoT devices to realize automatic lighting control.

Device to be mounted on any doors or windows to detect an opening or closing event. It adds physical security monitoring to a location by warning of intrusion or unauthorized entry.

AM319 is a compact indoor ambience monitoring sensor for measurement of multiple environmental conditions. Values are shown on the E-ink screen in real-time that allows to quantify the indoor environment and comfort.

AM104 is a compact indoor ambience monitoring sensor for measurement of temperature, humidity, motion & light. These data will be shown on the E-ink screen in real-time, which allow to quantify the indoor environment and comfort.

AM107 is a compact indoor ambience monitoring sensor for measurement of temperature, humidity, light, CO2 concentration, TVOC, barometric pressure and motion. These data will be shown on the E-ink screen in real-time, which allow to quantify the indoor environment and comfort.

EM300-TH Adopts Sensirion industrial-grade digital temperature & humidity sensor, providing ±0.3°C high accuracy of temperature and ±3% RH of humidity. With a IP67 rated enclosure.

EM500-CO2 is designed for measuring gaseous carbon dioxide (CO2) concentration in harsh environments. Besides, it also supports temperature, humidity and barometric pressure measurement.

The EGK-LW20W00 is a battery powered sensor intended for waste level measurement up to 1.5 meters. The device sends collected data over the LoRaWAN® network.

This device reads temperature, humidity, pressure, light intensity, air quality (expressed as IAQ or VOC value) and CO2. 3 traffic light LEDs for air quality display with adjustable brightness. Ideally suited for a wide range of applications such as building automation, condition monitoring, predictive maintenance, security, healthcare and many more use cases.

Measures the CO2, temperature, humidity, and barometric pressure in any space.

Detects the presence of people in a room. Up to 14 meter detection diameter.

Measures the relative humidity (%) and temperature. Relative humidity is useful in managing building and asset lifetime, HVAC (Heating Ventilation Air Conditioning) and comfort optimization.

The Wireless Proximity Sensor can detect objects that are removed or placed in front of the sensor. In addition to periodic heartbeats every 15 minutes, the sensor transmits a message when an object is removed or placed in front of the sensor.

Measures the temperature in any space or on any surface. The temperature sensor is versatile and can enable dozens of applications, from desk occupancy and cold storage to energy efficiency and sustainability.

The Wireless Touch Sensor sends a message to the cloud every time it is touched. In addition to messages triggered by touch, it transmits a heartbeat message every 15 minutes to notify the system that it is within range and operational.

The kuando Busylight can be installed in large variety of use cases. Through a downlink the Busylight can be programmed to show any color and used as a visual notifier, indicating a certain event, status or as a cue for specific handling.

The Ranos product range consists of two high accuracy, wireless outdoor sound level meters and cloud applications suitable for permanent and temporary installation. DSS suppies the Ranos dB in a class 1 and a class 2 measurement accuracy version. The Ranos dB is powered by solar energy, works fully autonomously and has LoRa connectivity.

LevelSense is a compact, ultra-rugged IoT device designed for remotely monitoring the level of different types of fluids and solids (e.g. water and waste) in tanks, bins and silos.

PeopleSense is a compact, ultra-rugged IoT device designed for remote counting of people or other traffic flows, such as cycles or slow- moving vehicles

BoB Assistant for predictive maintenance and operational assistance. Permanent monitoring of vibrations and recorded temperatures for isolated systems such as pumps, air conditioning or cooling units.

This device monitors indoor air quality, temperature, humidity, barometric pressure, and ambient noise. It also measures the level of carbon dioxide (CO2) and volatile organic compounds.

This device monitors occupancy as well as temperature, humidity, and ambient light. Easily mounted directly onto surfaces, no drilling required.

This device monitors energy usage and the health condition of the power line. It controls connected appliances via an internal 16A relay. Simply plug into the power socket.

This device monitors desk-, small room occupancy and temperature. Easily mounted directly onto surfaces, no drilling required.

A multi-mode tracker with embedded sensors combining GPS, Low-power GPS, Wi-Fi Sniffer, BLE and LoRaWAN TDoA geolocation technologies, supporting accurate outdoor & indoor geolocation. Ideal for tracking, zone notification or monitoring of workforce safety and security.

A multi-mode tracker with embedded sensors combining GPS, Low-power GPS, Wi-Fi Sniffer, BLE and LoRaWAN TDoA geolocation technologies, supporting accurate outdoor & indoor geolocation. Compact and robust form factor, designed to resist harsh surroundings.

A multi-mode tracker with embedded sensors combining GPS, Low-power GPS, Wi-Fi Sniffer, BLE and LoRaWAN TDoA geolocation technologies, supporting accurate outdoor & indoor geolocation. Versatile and multi-purpose with its small size and long battery life.

The moodbox is an easy to use and integratable user feedback device.

Measure indoor comfort by monitoring CO2, temperature, humidity, presence.

The Office Occupancy Counter measures how rooms are used. By measuring traffic in the passageways, occupancy can be clarified and the information used to determine the utilisation of a building or room.

With Vicki's multi-room home heating control, you can not only turn on and off the radiators in your house, but adjust the heating power of each of them separately.

MClimate Flood Sensor is a compact flood sensor suitable for residential and commercial applications. If a flood is detected, data is immediately transmitted.

MClimate HT LoRaWAN Sensor is an indoor temperature and humidity sensor with 10+ years of battery life, configurable settings and discreet design.

MClimate Multipurpose Button LoRaWAN® is a simple but versatile device with many applications. Featuring a single button with 3 types of clicks and a temperature sensor, there are unlimited configuration options across industries and end customers.

MClimate CO2 Sensor and Notifier is a device that uses NDIR technology to measure the actual CO2 and has built in temperature and humidity sensors. The device also has acoustic and visual notification abilities to indicate occupants whether a room should be ventilated.

Ideal for holistically monitoring the home and office environment, whether it is measuring and reporting temperature, humidity, open/closed doors and windows or other custom features.

Ideal for holistically monitoring the home and office environment, whether it is measuring and reporting temperature, humidity, open/closed doors and windows, pir/occupancy or other custom features.

The ax-dist is a distance measuring sensor with LoRaWAN wireless technology. It measures distances of up to 5m and can be used for a variety of applications such as parking, fill level or seat occupation measurement. The ax-dist has a battery lifespan of up to five years depending on the settings and can be used both indoors and outdoors.

The ax-opto distance sensor with LoRaWAN wireless technology. It can measure distances up to 1.3 meters and can be used in different application. F.e parking and fill level of tanks. The battery can have lifetime up to multiple years.

Monitor the number of people who enter or exit any kind of wide indoor entrance. Suitable for congress centres, schools and universities, hotels and restaurants, retail spaces or large office complexes. Terabee People Counting L-XL is GDPR compliant, protecting anonymity with 98%+ people counting accuracy. Supports HTTP(s), MQTT(s) and LoRaWAN communication protocols.

Count people over conventional swing doors and passageways. Terabee People Counting M is discrete, compact and can be flexibly deployed via PoE, Ethernet or WiFi connectivity. GDPR-compliant, the device ensures user anonymity with 95% counting accuracy. Supports HTTP(s) and MQTT(s) communication protocols.

Monitor material fill levels inside your silos and tanks using wireless, low-energy Terabee IoT devices. Our LED Time-of-Flight technology can reach up to 60m range for non-intrusive inventory management - from small to even the largest silos

Thingsee AIR monitors CO2 levels, TVOC levels, temperature, humidity and barometric pressure. Measuring TVOC and CO2 levels together gives you a comprehensive view on your facility air quality and it’s a great addition to any building’s technology.

Thingsee ENVIRONMENT is a multipurpose, retrofittable, wireless IoT device for environment monitoring. It can be used for a variety of business verticals.

Thingsee PRESENCE is a wireless IoT device for measuring people presence through your facility. You can use the sensor for facility management and occupancy detection in various places such as offices, hospitals or restaurants.

The ultrasonic wireless sensor can be used for remote monitoring of fill levels. The filling level, but also other parameters such as geodata and status data of the sensor, are measured or recorded at adjustable time intervals and transmitted to the remote station in the LoRa network. The data is available there for display or further processing. The sensor is configured via a Bluetooth interface using a mobile device (smartphone or tablet) and the WILSENcontrol app belonging to the sensor.

The ioTracker features multiple localisation technologies like GPS, WiFi, Bluetooth 5.1 and LoRa triangulation. This provides the best balance between high-accurate positioning and power efficiency in almost every in- and outdoor situation.

Designed for outdoor use, this Senlab offers a ruggedized IP68 casing and robust wireless connectivity for continuous monitoring in harsh and challenging environments.

LoRa door sensor is a low-cost door sensor which can be used to report open/close state of a building door, cabinet door or drawer.

The LoRa People Counter is a battery powered sensor for counting people crossing a horizontal line. The counter consists of two parts, an infrared (IR) transmitter part and an infrared receiver part, which always work together.

The SQUID is a connected sensor equipped with 12 clamps of current measurement. It sends the collected current measurements via a communication LoRa® wireless and long distance.

The PBH sensor is a button sensor specifically designed for indoor application. Its design is meant for homes and offices usage. The PBI sensor on the other hand is a button sensor specifically designed for indoor application. Its design is meant for all kind of businness. The low battery consumption allows this sensor to last for years without battery replacement.

Sensor that measures temperature and humidity, with maintenance free lifetime of 10 years at a 5-minute measurement interval. Easy to use, configurable over the air and stylish in design to fit into indoor spaces.

OY1210 CO2 meter measures temperature, humidity and carbon dioxide. Supports adaptive reporting functions to detect rapid changes in CO2 values.

OY1700 Air quality (PM) sensor is designed to measure PM10, PM2.5, PM1.0, temperature and humidity in indoor environments. The sensor is intended for indoor climate control and monitoring indoor air quality. It is optimized for reliable and secure operations.